Where is the NFC Scanner of my phone located?

Before you try to scan your gemstone, please make sure your NFC reading function of your phone is enabled. On Android phones, you can do this in your settings. iPhones typically have their nfc activated.



iPhone

You need an iPhone 7 or higher.
The NFC scanner is located somewhere on the top part of your phone. You can find out by gently moving your necklace along the phone.

Samsung

The NFC scanner of most Samsung phones is located in the center on the backside of your phone.

Huawei

In most cases, the scanner is located in the top right corner on the backside of your phone.
Hence, on the opposite side of your camera, which can be found in the top left corner.

Other phones

In most cases, you will find the NFC scanner of your phone in the very center or at the top part of your phone. You can also find out by slowly sliding your gemstone around the backside of your phone until you hit it.

How Do I Scan My First evermée?

Open the app and click on the “Log in here!” button underneath “Sign Up” button
Type in your full name, email address and password. Make sure your full name is not identical with others, and please type in your password using the suggested guidance.
Click on the “Login” button.
This will take you to the home page with a button saying “Scan Evermee”
Once you press this button there should be a pop up that says “Ready to Scan”.
Hold your evermee jewelry against your phone (where the NFC scanner is located) and gently move it around. Note: an NFC scanner has to touch your device to be scanned, and make sure there is no gap between your phone and your gemstone.
Once it’s been scanned, a new page will pop up, here you can begin to upload your photo and immortalize your memory.

There are few things that you need to keep in mind when it is your first time scanning your evermee.

Please make sure there is no other metal object near your phone and your evermee.
If you are using a metal / solid phone case, pop socket or phone finger ring holder, please take them off as it could weaken the NFC antenna sensitivity on some devices
Make sure you try to scan both sides of the jewelry as one side could be more responsive than the other side.

How Do I Upload A Memory When I Have The Jewelry?

Open the Evermee app and click “Scan Evermee”
Hold your jewelry against the back of your phone to scan (where the NFC scanner is located) Note: an NFC scanner has to touch your device to be scanned, and make sure there is no gap between your phone and your gemstone.
Once it’s been scanned, a new page will pop up, press on the “Select Photo” button
Allow access to your photos if needed then pick the photo you’d like to put in
When the image shows, on the bottom right of your screen press the “Crop” button
After this there will be a “Next” button below your photo, click on it
It will display the words “Success!” meaning your photo has been added
Here you can click “Next” and add a title along with some words to go with your photo
Click “Next” one more time and your memory is fully uploaded!

Tip: On all the pages after choosing your photo, you can easily go back and switch to another if you change your mind

There are few things that you need to keep in mind when it is your first time scanning your evermee.

Please make sure there is no other metal object near your phone and your evermee.
If you are using a metal / solid phone case, pop socket or phone finger ring holder, please take them off as it could weaken the NFC antenna sensitivity on some devices
Make sure you try to scan both sides of the jewelry as one side could be more responsive than the other side.



How Do I Upload A Memory Before My Necklace Arrives

Open the Evermee app and sign up/log in
Click on “My Collection” and you should see “Add Evermee” with a plus sign before it
Here you simply add the access code that evermee has emailed to you
Next, allow access to your photos if needed then pick the photo you’d like to put in
When the image shows, on the bottom right of your screen press the “Crop” button
After this there will be a “Next” button below your photo, click on it
It will display the words “Success!” meaning your photo has been added
Here you can click “Next” and add a title along with some words to go with your photo
Click “Next” one more time and your memory is fully uploaded!

Tip: On all the pages after choosing your photo, you can easily go back and switch to another if you change your mind
Was this article helpful?
Cancel
Thank you!